-
CAN bus splitter
Zubax CAN Bus Splitter is a hub that allows multiple devices to connect to the same CAN Bus network.Regular price $23.00Regular priceUnit price per -
Steel target plate for magnetic grippers
A plate made of a steel alloy with high permeability and high saturation magnetization.Regular price $11.00Regular priceUnit price per -
Pika Spark
Pika Spark is a matchbox-sized high-performance micro robot control system combining an unprecede...Regular price $980.00Regular priceUnit price per -
Sold outD-SUB converter cables
Male and female D-SUB DE09 Converter Cable for the Drogue Systems Cyphal/CAN Node (CAN-BPWRD)Regular price $11.00Regular priceUnit price per -
CyphalPicoBase/CAN
The CyphalPicoBase/CAN is an RP2040 based open hardware reference design with a fully Cyphal-comp...Regular price From $47.00Regular priceUnit price per -
Mini-Dyno.UAV
Foucault Mini-Dyno is a complete modular benchtop test rig for testing, efficiency mapping, fine-...Regular price $4,897.00Regular priceUnit price per -
Sold outCyphal/CAN Node Development Board
The Drogue Systems CAN-BPWRD is a development board based on the STM32G491 microcontroller unit (...Regular price $70.00Regular priceUnit price per -
uNODE CAN Interface Converter
The RaccoonLab μNODE (Micro Node) controller is a versatile and adaptable general-purpose CAN con...Regular price $82.00Regular priceUnit price per -
MiniNODE v2 CAN Interface Converter
Mini v2 node is a general-purpose CAN converter. It has 2 groups of pins for a typical 5V servo (...Regular price $94.00Regular priceUnit price per -
Cyphal/UAVCAN UAV Lights node v2.2.0
The node blinks LEDs either by the command received from the autopilot or by the configured behav...Regular price $128.00Regular priceUnit price per -
GPS-MAG-BARO with external antenna v3.2
Allows acquisition of GNSS data with external antenna, magnetic field strength and direction, and...Regular price $700.00Regular priceUnit price per -
GNSS-MAG-BARO with internal antenna v3.1
Allows acquisition of GNSS data with internal antenna, magnetic field strength and direction, and...Regular price $700.00Regular priceUnit price per -
BoolDrive BD1D50 Evaluation Board
Zubax BD1-D50-EVAL Evaluation Board for BD1-D50 "Mitochondrik" is a basic reference design and an...Regular price From $295.00Regular priceUnit price per -
2 mm silver-plated 1x40 pin header
2 mm silver-plated 1x40 pin header. It can be used for mounting the Zubax Mitochondrik LV onto a ...Regular price $3.00Regular priceUnit price per -
Power Connector
Power connector node is designed to pass current (up to 60A) to power load.Regular price $34.00Regular priceUnit price per -
Firmware update connector SWD-NEEDLE
Connector for RaccoonLab nodes firmware update via Zubax SWD programmer (Zubax Babel-Babel or Dro...Regular price $9.00Regular priceUnit price per
